10% Off
50mm Boring Head with MT-3 Boring Shank for Lathe Milling
Original price was: $48.00.$43.50Current price is: $43.50.
In StockMaterial Carbon Steel
Item Dimensions LxWxH 5.5 x 5.5 x 7 Centimeters
Morse taper 3
fits 12 mm boring bars
Description
50MM BORING HEAD MT-3 SHANK
BORING HEAD 50mm DIAMETER,3MT TAPER,TAKES 12mm BORING TOOLS,
,ADJUSTABLE IN 0.02mm GRADUATIONS.
Additional information
| Weight | 1 kg |
|---|
Related Products
16 pc. Mini Tool Holder/Bit Set
This 16-Piece Mini Tool Holder/Bit Set features left and right offset angles that are approximately 30°. Each tool holder includes bit and wrench. Black oxide finish.
5/16″ X 5/16″ X 3″ Parting tool holder X 1 PC.
5/16″ X 5/16″ X 3-1/2″ Straight turning tool holderX 1 PC.
5/16″ X 5/16″ X 3-1/2″ Left turning tool holder X 1 PC.
5/16″ X 5/16″ X 3-1/2″ Right turning tool holder X1 PC.
6 PCS 1/8 TOOL BIT .
2 PCS PARTING BLADE.
4 ALLEN KEYS .Original price was: $45.00.$38.00Current price is: $38.00.This set comes with these sharpened profiles: offset right and left-hand tools with chip breaker, straight and ship breaker style treading tools, internal threading tool, parting tool, boring tool and turning tool.
HSS (high-speed steel) has been heat treated for hardness and wear resistance, which keeps a sharp edge longer than other carbon steels.
Original price was: $39.00.$32.00Current price is: $32.00.This set comes with these sharpened profiles: offset right and left-hand tools with chip breaker, straight and ship breaker style treading tools, internal threading tool, parting tool, boring tool and turning tool.
HSS (high-speed steel) has been heat treated for hardness and wear resistance, which keeps a sharp edge longer than other carbon steels.
Original price was: $44.00.$36.00Current price is: $36.00.Material Carbon Steel
Item Dimensions LxWxH 5.5 x 5.5 x 7 Centimeters
Morse taper R-8
fits 12 mm boring barsOriginal price was: $48.00.$43.50Current price is: $43.50.Set of 3 Lathe Mini Parting Cut Off Tool Holder With 6 Pcs Of 5mm M2 HSS Blade
DESCRIPTION
A Small Mini Lathe Cut Off Parting Tool Holder
Supplied with a HSS Parting Blade Size 1.45 x 5 x 63mm & Allen Key
These are machined to precise tolerances & are heat treated
Designed to support the Blade over a wide area to prevent breakages.
Best suited and ideal for Small Lathes like Unimat, Emco and watch makers.
Overall Length is 3″ (75mm).
Shank Size 6mm, 8mm & 10mm Square.
** No. Of Blades Included : 6 Nos. **
Original price was: $40.00.$30.50Current price is: $30.50.Style TE : Neutral Threading Tool 60º included angle; used for universal threading, V-grooving,
chamfering, turning, boring and facing
Style TBL : Left Hand 15º Lead Angle for rough facing to center or where no shoulder is needed
Style TAL : Left Hand suitable for facing to a square shoulder
Style TBR : Right Hand 15º Lead Angle for rough turning where a square shoulder is not needed
Style TAR : Right Hand suitable for machining to a 90º square shoulder.$24.00 – $90.00Size : 10MM - 12 MM - 16MM - 20MM - 25MM - 6MM - 8MM
