-
Jewelry Tools
Rubber Mixing Bowl for Jeweler’s
$8.95 $9.95Price range: $8.95 through $9.95 Select options This product has multiple variants. The options may be chosen on the product pageThis rubber mixing bowl has different opening at the top and is manufactured from tough black durable rubber.
The flexible rubber makes the mixed investment material easier to pour into the casting flask
The smooth surface enables ease of cleaning.
Measures:different Height -
Jewelry Tools
Sawing V-Slot Bench Pin with Clamp with Nylon Pins
Original price was: $19.99.$15.50Current price is: $15.50. Add to cartThis bench pin comes with multiple slots cut in it to support your metal from all sides while doing intricate sawing.
It also has a V-Slot for general sawing purposes.
You can attach it to your bench with the provided clamp, but it also has holes cut to securely mount it to your bench with screws if you prefer.
The specialized slots in this bench pin are located on both sides, making it convenient for right and left-handed people.
Grooves cut in the ends offer support for filing your wire and sheets.
Measures 6 x 4 inches, 1/2 an inch thick, and accommodates for a bench up to 2 1/4 inches thick. -
Watchmakers Tools /Horology Tools
SET OF 14 POCKET WATCH KEYS SIZE 00-12 TOOLS WINDER VINTAGE WINDER KEY
Original price was: $9.00.$7.50Current price is: $7.50. Add to cartThe set comes with a total of 14 pieces pocket watch keys
The key numbers are 00, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 and 12.
The keys are solid brass with a nickel finish on the barrel
Each major measures 1½” -
Watchmakers Tools /Horology Tools
SET OF 14 POCKET WATCH KEYS SIZE 00-12 TOOLS WINDER VINTAGE WINDER KEYS
Original price was: $12.00.$8.50Current price is: $8.50. Add to cartThe set comes with a total of 14 pieces pocket watch keys
The key numbers are 00, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 and 12.
The keys are solid brass with a nickel finish on the barrel
Each major measures 1½”14 Piece Pocket Watch Key Set With Chain –
This set comes with a total of 14 piece pocket watch key, so it is the best item as a master key for all your pocket watches. If you have many curved pocket watch in your stock but there is problem for forever key. This 14 piece key set is the solution for you. Most of the curved pocket watch keys are available in these 14 prongs. The numbers are 00, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 and 12. Some extra large key holes are not available in these key sets. This set of pocket watch keys is used to wound the pocket watch. The keys are solid brass with nickel finish on the barrel. Each measures 1½”. Each is a different size and has a size stamp for clarification
-
Sewing & Lacing
Set of 4 Color Strong Wax Thread 1 mm
Original price was: $9.95.$8.95Current price is: $8.95. Add to cartWax Thread 1 mm
Wax Thread 1 mm
This waxed polyester thread, spun from three individual fibers, is used for sewing the classic saddle stitch. The wax ensures that the thread runs smoothly and also seals the seam holes.
Available white, natural, dark brown and black.
made in India
-
Jewelry Tools
Set of 5 Ultra Round Disc Cutter Set 5 PC Punches Tool for Jewelry Making Tools
Original price was: $44.00.$39.00Current price is: $39.00. Add to cartSet of 5 Ultra Round Disc Cutter Set 5 PC Punches Tool for Jewelry Making Tools
he product in display is Round Disc Cutter comes with 5 hardened carbon steel punches ranging from 12.7 – 25.4 mm in width and a square steel disc cutting block. The punches are machined flat and smooth at the cutting end to create perfect circle-shaped blanks every time, and beveled at the other end for use with a heavy mallet or hammer. This round disc cutter will cut up to 20 gauge metal, and can be used on a rubber mat or block to ease the cutting process. To use it, remove all punches from the block, and select the size punch you would like. Place your sheet metal in the slot and place your punch, sharp side against the metal, in the correct slot. Strike the beveled side of the punch with a heavy mallet until it pierces through the sheet metal. Be careful of your fingers and other items on your work surface. Overall length/dimensions: Measures Disc cutter 3 x 2-3/4 inch – Punch sizes: 1/2, 5/8, 3/4, 7/8, 1 inch (12.7, 15.9, 19, 22.2, 25.3 mm) -
Jewelry Tools
Set of 7 Ultra Round Disc Cutter Set 7 PC Punches Tool for Jewelry Making Tools
Original price was: $44.00.$39.00Current price is: $39.00. Add to cartSet of 7 DIsc Cutter Premium quality
The product in display is Round Disc Cutter comes with 7 hardened carbon steel punches ranging from 1/4″ mm TO 5/8″ in width and a square steel disc cutting block. The punches are machined flat and smooth at the cutting end to create perfect circle-shaped blanks every time, and beveled at the other end for use with a heavy mallet or hammer. This round disc cutter will cut up to 20 gauge metal, and can be used on a rubber mat or block to ease the cutting process. To use it, remove all punches from the block, and select the size punch you would like. Place your sheet metal in the slot and place your punch, sharp side against the metal, in the correct slot. Strike the beveled side of the punch with a heavy mallet until it pierces through the sheet metal. Be careful of your fingers and other items on your work surface. Overall length/dimensions: Measures Disc cutter 3 x 2-3/4 inch – Punch sizes: 1/4″,5/16″,3/8″,7/16″,1/2″9/16″,5/8″
Note: PLEASE CLEAN AND APPLY OIL BEFORE USE.
Note: Remember to wear eye protection
ALLOY STEEL
made in india
-
Machinist Tools
Shank Set of TCMT Lathe Tools-5Pc
$24.00 $90.00Price range: $24.00 through $90.00 Select options This product has multiple variants. The options may be chosen on the product pageStyle TE : Neutral Threading Tool 60º included angle; used for universal threading, V-grooving,
chamfering, turning, boring and facing
Style TBL : Left Hand 15º Lead Angle for rough facing to center or where no shoulder is needed
Style TAL : Left Hand suitable for facing to a square shoulder
Style TBR : Right Hand 15º Lead Angle for rough turning where a square shoulder is not needed
Style TAR : Right Hand suitable for machining to a 90º square shoulder. -
Bending Aids
SHEAR / BRAKE / ROLLER BENDER COMBINATION 8″ METAL Shear Press Brake 20-SWG
Original price was: $280.00.$230.00Current price is: $230.00. Add to cartIndustrial Sheet Metal Brake 3-In-1/8, 8-Inch Combination Sheet Metal Brake, Shear Press Brake 20-Gauge Capacity, Shears and Slip Roll Machine for Shear Bending Rolling, Brake Shear Roll Machine
8″ width shear brake and roll 20 gague Mild steel sheet Capacity
Press Brake bending 90°
Segment fingers brake dies
Material stop allows repeating shear or bending
3-IN-1/8 bending blade size :1”x1, 2”x1, 2.5″x1, 3″x1
-
Leather Crafting Basic Tools
Shoe Leather Working Tool Tack Hammer Repair Shoemaker Plier
Original price was: $12.00.$8.95Current price is: $8.95. Add to cartFeature:
1. Lightweight and easy to fierce shoes.
2. Quality assurance and it is a good helper.
3. This clamp is made of high quality metal, anti-rust, high hardnessColor:Black+sliver
Material:Metal
Size:length 21cm
Fit for:Fix shoesPackage Included:
1pc pincer -
Jewelry Tools
Small Corrugated Rolling Mill Metal Craft Forming Tool, 24 Gauge.
Original price was: $130.00.$105.00Current price is: $105.00. Add to cartSmall Corrugated Rolling Mill Metal Craft Forming Tool, 24 Gauge.
Small corrugated rolling mill for jewellery craft.
Add texture and interest to your metal with this tool.
Perfect for wire or sheet metal up to 24 gauge. (Corrugation works best with soft metals).
The bottom roller is fixed and the top roller can be adjusted in height to suit the thickness of the metal you are working with.
The thicker the metal, the more effort it will take to roll.
Sizes:
Overall width (excluding handle) : 250mm
Overall (to top of adjusting knobs) : height 150mm
Rollers are 200mm long when in the tool.
Can be used with a bench vice to hold in place while in use. -
Jewelry Tools
Small Whip Ceramic Crucible Tongs for 250 Gram
Original price was: $7.95.$7.50Current price is: $7.50. Add to cart* Protective Clothing, heat gloves and eye protection must be worn when melting metals. * Safety factors must always be the Priority!
SPECIFICATIONS:
Material: Black COlor Steel Wire
Whip Handle Length: 10-1/4″
Top rated products
-
Multi Tool Manual Belt Puncher Maker Machine For Pliers And Straps Revolving Leather Belt Hole Punch Plier
Original price was: $12.00.$8.50Current price is: $8.50.
-
Sewing Awl Kit Leather Stitching Awl Tool Kit Hand Stitcher Repair Tool Kit Leathercraft Accessories for Leather and Heavy Fabrics
Original price was: $25.00.$15.00Current price is: $15.00.
-
Sewing awl kit with white and Black Thread
Original price was: $30.00.$20.00Current price is: $20.00.
-
Poly Mallet Hammer 50 mm
Original price was: $20.00.$9.50Current price is: $9.50.
-
Leather Manual Hand Clicker Machine
Original price was: $950.00.$795.00Current price is: $795.00.
